Having a Keurig stop working can be incredibly frustrating. Before you throw your hands in the air and give up, try troubleshooting your Keurig. It could be as simple as checking the power, water, or the lines for clogging.
Most likely, one of these simple solutions will get your Keurig up and running again. So take a deep breath, grab a cup of coffee, and let’s get to it.
What Causes Keurig to Stop Working?
If your Keurig suddenly stops working, there are a few common reasons that could be the cause of the issue. The most likely reasons are lack of power, lack of water, or clogged lines.
To troubleshoot your Keurig, you should check the power, water, and lines. If the power is fine, then check the water supply. If there’s no water, fill up the reservoir.
Check the lines for any clogs or blockages. These are the three most common reasons for why your Keurig may have stopped working and can be easily checked.
If you still can’t get your Keurig to work after troubleshooting, you may need to call an expert. In some cases, it may be an issue with the Keurig itself that needs to be fixed by a professional. If you follow these steps and still can’t get your Keurig to work, it’s probably time to call in an expert.
Common Reasons for Keurig Not Working
If you’ve come across an issue with your Keurig suddenly not working, it’s likely due to a lack of power, water, or clogged lines. Even though it can be frustrating, it’s usually an easy fix and you can be up and running in no time. When troubleshooting your Keurig, start by checking the power.
Make sure the power cord is securely plugged into a working outlet and the power switch is turned to the “on” position. If the power’s good, check the water level.
Top off your reservoir if needed and make sure your sink is turned on. Run a few ounces of vinegar through your machine and check the lines to make sure they’re not clogged.
If all else fails, contact the manufacturer for support. While it may be a bit of a headache, troubleshooting your Keurig is a cinch when you know the right steps to take. By following the above steps, you can get back to coffee-making in no time.
Lack of Power
Your Keurig may not be working if it’s not getting enough power. Check the power cord connection between the outlet and the Keurig. Make sure it’s snug and secure.
If the cord looks to be in good condition, try using another outlet in your home.
If none of these solutions fix the issue, you may need to replace the power cord. If your Keurig is getting power but it’s still not turning on, you may have a bigger problem. If this is the case, it’s best to contact the manufacturer for assistance. Keep in mind that some models come with a one-year limited warranty, so you may be able to get a repair or a replacement at no cost.
Lack of Water
If your Keurig has stopped working, you’ll want to check the water levels before anything else. Make sure the water reservoir is full, then check the lid to make sure it is secure and not leaking.
If the water reservoir is full and the lid is secure, then move on to checking the lines. If the water reservoir is empty, fill it up and then restart your Keurig to see if it works.
Another issue could be a clogged line in the Keurig. If you’ve noticed that your Keurig has suddenly stopped working, you’ll want to check the lines for any clogs.
You can do this by running a needle through the line to clear out any debris that may have built up in it. You can also use a small brush or a can of compressed air to help clear out any clogs. If you find a clog, make sure to clear it out before turning your Keurig back on. This should help get your Keurig working again.
Clogged lines can be a reason why your Keurig has suddenly stopped working. The lines in your Keurig can get clogged with mineral deposits, coffee grounds, and other debris. Clogging can prevent water from flowing properly and cause the machine to shut down.
To clear out the clogged lines, you’ll need to descale the device. Descale your Keurig by running a mixture of white vinegar and water through the device.
Make sure to run at least two or three cycles of water through the machine after descaling to flush out any leftover vinegar. If you’re still having issues after descaling your Keurig, check the filter basket, which can get clogged over time.
The filter basket should be cleaned regularly to keep it from becoming blocked and clogging the lines. You can clean the filter basket with a soft cloth and warm soapy water.
If you’ve done all of the above but your Keurig machine is still not working, it may be time to call a professional for further assistance. A professional can inspect your machine and make sure all of the lines are clear so that your Keurig can work properly again.
Troubleshooting Your Keurig
If your Keurig has suddenly stopped working, the first thing you should do is check the power. Make sure the machine is properly plugged in and that the outlet is getting power.
You should also check the power switch and make sure it’s in the “on” position. If the power is not the issue, the next thing you should do is check the water. Make sure the water reservoir is full and that the water line is properly connected to the Keurig.
If the water is not the issue, you should check the lines. Make sure the lines are clear and that there are no blockages that could be preventing the machine from working.
If you find any blockages, remove them and try again. If all else fails, you may need to contact the manufacturer or a qualified repair service.
Step 1: Check the Power
Start checking with the power source. Make sure that it is plugged in and the circuit breaker is not tripped.
You can also try unplugging it for a few minutes and re-plugging it back in. If it is plugged in correctly, but still doesn’t work, you should check if the outlet is working properly by plugging in another device. If the Keurig is still not working, you should check that the power cord is properly connected to the outlet.
If the cord was loose and not connected properly, this could be the problem. If the cord is fine, you can try replacing the power cord with a new one. If the new power cord works, then the old one needs to be replaced.
Step 2: Check the Water
Checking the water supply of your Keurig is one of the best troubleshooting steps you can take. If you have recently filled your reservoir, be sure to check that the water is still flowing, as the pump may have become clogged. If you have not replaced the water recently, try to fill the reservoir and see if that helps resolve the issue.
If you’re still having problems, you may need to do a full descaling of the machine, which is a process of removing mineral build-up from inside the lines and the water reservoir. This process can be done with the use of a descaling solution, which can be easily purchased online or in most stores that sell Keurig products.
Step 3: Check the Lines
If your Keurig is still not working, the culprit is likely clogged lines. The lines in a Keurig run from the water tank to the filter and the filter to the K-Cup.
If these lines become clogged, your Keurig will not be able to take in water and will stop working. To fix this, you’ll need to unclog the lines. Start by taking apart your Keurig and checking for any clogs.
If you find any, use a thin tool to remove them. If you don’t find any clogs, try using vinegar and hot water to flush the lines.
Let the vinegar and hot water sit in the lines and filter for around 15 minutes before flushing with clean water. Another option is to purchase a descaling solution and run it through your Keurig.
This will help to remove any mineral deposits that may have built up and are causing the lines to be clogged.
To use a descaling solution, mix it with the correct amount of water and run it through the Keurig twice. Once the process is complete, flush the lines with clean water and reassemble the Keurig. Doing this should help to get your Keurig running again in no time!