How to Disassemble and Reassemble a Pool Table - Wild Billiard (2023)

Looking to take your pool table apart and move it to a new home? Or maybe you need to make some repairs and need to know how to take it apart first. Either way, knowing how to disassemble and reassemble a pool table is a handy skill to have. In this blog post, we’ll show you step-by-step how to do just that. So let’s get started!

1. Start by removing the pool table felt from the surface of the table. Use a putty knife to loosen any staples that are holding it in place.

2. Take off all the rails that surround the pool table playing surface. Unscrew them from the underside of the table using a screwdriver or power drill.

3. Remove the slate from the pool table by taking out the screws that hold it in place. You may need help with this step, as slate can be heavy and difficult to move.

4. Once all of the pieces have been removed, you can begin cleaning and polishing them before reassembling your pool table.

(Video) How to Disassemble a Pool Table THE RIGHT WAY!

5. To reassemble your pool table, start by attaching the rails to the underside of thetable using screws or nails. Then, add new felt to the surface of the table and stretch it tight so there are no wrinkles or bubbles. Finally, add new slate tothepooltable top and screwitinto place using washers for stability

Can you disassemble a pool table yourself?

Pool tables are one of the most popular and beloved recreational pieces of furniture, however, when the time comes to disassemble the table, this task can become quite a daunting and intimidating project.

To ensure you get it done safely and without damaging any parts, it is generally not recommended to do so on your own – instead have a professional installer come in with all the necessary tools. However, if you are confident, and have an adequate number of people helping with all board lifting and carrying the pieces out, then disassembling a pool table can be a satisfying task.

By removing one part at a time and following each step closely as you go along, you will have your pool table completely taken apart in no time!

How do you take apart a pool table to move it?

Moving a pool table can be a time-consuming process, but with the right tools and techniques, it is easy to do. To ensure a safe move, many steps must be taken before you attempt to take apart your pool table.

First and foremost, it is important to seek help from at least two other people to assist in lifting and maneuvering the piece.

(Video) How to Recover a Pool Table (START TO FINISH!)

Additionally, several crucial components must be removed for the move such as cues, balls, trays of coins or accessories, pocket liners, and all bolts that attach the rails and legs.

Once all items have been cleared away, the pockets can then be unscrewed on one side of the slates using adjustable wrenches while being supported by your helpers on the opposite side.

Lastly, separate each section of the table carefully and wrap them safely in moving pads and blankets so they are protected while they are being transported.

How do you put a pool table back together?

Reassembling a pool table can be a rewarding experience for anyone looking to get into the carpentry or upholstery business.Starting with the most important part of the process, reassembling your pool table means that you have to level it correctly.

To do this properly, make sure you have all the necessary materials handy such as a level and screws, nuts, and bolts. After that, you need to lay down the slate and then proceed to secure it by attaching the frame and legs to it securely.

Following that, you cut and fit some cloth for the surface of the table which gives it an interesting texture specific to pool tables. Lastly, installing rubberized sights around the table completes the assembly of your pool table giving it an eye-catching look fit for any game room.

(Video) How to assemble a snooker table/Video tutorial

How much does it cost to disassemble and reassemble a pool table?

Disassembling and reassembling a pool table is not something everyone has experience with, so it often proves too difficult or intimidating to attempt. This can mean that the task usually requires professional help, with different rates for the service depending on the complexity of the table and the area you are in.

Generally speaking though, most average-sized pool tables will cost somewhere between $125 and $250 to have disassembled and reassembled by a professional. It’s important to remember however, that getting this done correctly is key as mistakes can be costly down the line – for instance, if you end up wrongly connecting pieces or leaving little wobbles where there should be none, it could ruin your entire game later down the road!

How heavy is a pool table?

The weight of a pool table varies considerably depending on its exact size, materials, and construction. On average, a full-size regulation slate bed pool table can weigh between 500 to 1000 pounds.

Of course, a lighter non-slate version may be in the 300-pound range. It is important to keep this in mind when you’re purchasing a pool table as you’ll want to make sure the space you intend to place the table in can handle the weight properly.

Also, don’t forget that during setup it’s best to have at least two people there to help get the game up and running. Otherwise, it may become quite an arduous task for just one person!

Can you just take the legs off a pool table to move it?

Moving a pool table can be tricky – it is a very large piece of furniture and relocation requires planning. However, some people wonder if it may be possible to simply take the legs off the pool table, making it easier to transport.

(Video) Re-clothing a snooker table in 2 minutes

Unfortunately, this is generally not recommended. Even though the pool table is a separate unit from the playing surface, taking apart the whole thing can cause irreparable damage and prevent you from reassembling the table correctly.

Hiring professional movers for pool tables may be your best bet when relocating this kind of equipment. They know how to properly break down and reassemble the entire unit without harming any of the parts which can ensure that your experience with your pool table will remain smooth sailing for years to come.

How long does it take to dismantle a pool table?

Dismantling a pool table is a labor-intensive process that can take several hours, depending on the size of the table, the complexity of its parts, and the number of people working on it.

It’s important to have all the right tools for this job – a screwdriver, pliers, and an Allen wrench are some of the basics. Even with these tools, though, taking apart a pool table requires patience – careful removal and organization of all parts is paramount in ensuring proper reassembly.

Additionally, some disassembly may require attention from someone who is experienced in handling these pieces; different tables have different construction materials and mechanisms which can complicate the dismantling process. With all that taken into consideration, however, an average-sized pool table usually takes around two hours to disassemble properly.

Final Words

Now that you know how to take apart and put back together a pool table, you can easily do it yourself if you need to move the table or change the felt. You don’t need to be an experienced carpenter or billiards player to do this–anyone can do it with a little time and effort. So go ahead and give it a try next time you need to move your pool table!

(Video) Abandoned Snooker Table Restoration Complete Video


1. How to Re-Cloth a Pool Snooker Table Part 1 of 4
2. Full size 12ft Riley Snooker table installation time lapse in Phoenix, AZ. Fitting by Riley England
3. Table Assembling 2017 World Snooker Championship
4. How to Cover and Restore Pool Table Rails
(Penguin Amusement)
5. Snooker Table New Cloth | Snooker Table
6. This is a pool tip you must know! ✅ #billiards #billiard #8ballpool
(Ultimate Pool)
Top Articles
Latest Posts
Article information

Author: Lakeisha Bayer VM

Last Updated: 08/29/2023

Views: 6003

Rating: 4.9 / 5 (69 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Lakeisha Bayer VM

Birthday: 1997-10-17

Address: Suite 835 34136 Adrian Mountains, Floydton, UT 81036

Phone: +3571527672278

Job: Manufacturing Agent

Hobby: Skimboarding, Photography, Roller skating, Knife making, Paintball, Embroidery, Gunsmithing

Introduction: My name is Lakeisha Bayer VM, I am a brainy, kind, enchanting, healthy, lovely, clean, witty person who loves writing and wants to share my knowledge and understanding with you.